安裝石塑大理石門套更容易
一、準備工具：切割鋸、大盤式推拉據、卷尺、發泡膠、玻璃膠、膠槍。
1、 Preparation tools: cutting saw, large disc push-pull, tape measure, styrofoam, glass glue and glue gun.
二、考察現場是否具備施工條件。
2、 Inspect whether the site has construction conditions.
三、測量原始門洞到電梯自身門套的高度、寬度和深度，確定好仿大理石電梯門套側板和線條的尺寸。
3、 Measure the height, width and depth from the original door opening to the elevator door pocket, and determine the size of the side plate and line of the imitation marble elevator door pocket.
四、根據測量好的尺寸切割相匹配的仿大理石電梯門套線條和側板。
4、 Cut the matching imitation marble elevator door pocket line and side plate according to the measured size.
五、安裝連接件，固定仿大理石電梯門套側板。
5、 Install connectors to fix the side plate of imitation marble elevator door pocket.
六、墻體去要打木方龍骨，以便于固定，再把仿大理石電梯門套側板安裝到需要的門套洞內。
6、 Wooden square keel shall be set on the wall to facilitate fixation, and then the side plate of imitation marble elevator door pocket shall be installed into the required door pocket hole.
七、調節仿大理石電梯門套側板的尺寸，打發泡膠進行固定。
7、 Adjust the size of the side plate of the imitation marble elevator door pocket and fix it with foam glue.
八、打膠仿大理石電梯門套，進行45度角拼接。
8、 Glue imitation marble elevator door pocket for 45 degree angle splicing.
上邊的就是小編為大家整理的相關信息，更多的精彩內容請點擊我們的網站：鋁合金門套http://m.duobimai.com關注獲取更多精彩內容.
Above is the relevant information compiled by Xiaobian for you. For more wonderful content, please click our website: aluminum alloy door pocket http://m.duobimai.com Follow for more exciting content
下一篇：不銹鋼電梯門套在市場上的使用！上一篇：裝修線板的施工要注意什么？
